Overview: The Teledyne kit provides the modeler with an inexpensive board that can control coil couplers on a locomotive or car with the use of a horn or bell button in a conventional operating system. The main reason the kit is so inexpensive is the modeler is required to do the actual board assembly. Cool Features:     Designed for the conventional operator; horn / bell buttons control 2 outputs     These outputs are primarily designed for front / rear coil couplers     One output can drive both coli couplers (if the loco has a horn)     The kit could be used trackside to operate a crossing gate or whistle shed     Output drive: 800 ma continuous; 2A peak     Output drive: 2A continuous with user-supplied heat - sink Kit Contents: Note: Since this is a kit, no warranty is provided.  By purchasing of this product you agree to this limitation.

Ordering Information

TMCC, R2LC, CAB-1, and RailSounds are registered trademarks of Lionel LLC
DCS is a registered trademark of MTH, Inc.