Overview: The new patent pending Sound Commander 2 is a low cost way to add sound to your locomotives.  The Sound Commander 2 has extended conventional mode functionality, including two volume selections and Prime Mover rev ramp-up/down control.  Diminutive size permits installation into Beeps, Buddy's, Switchers, and many PW loco's, yet delivers over 1 watt of output power.  Operates in conventional mode with horn / bell buttons, or in command mode when interfaced to compliant products. The Sound Commander 2 product is complete kit (view contents), including "low profile" 2 inch diameter speaker, speaker baffle, mounting supplies, comprehensive installation manual, and connection cables for conventional and command operation. Listen to All Available Sound Sets See a Movie of the Geep sound set in action in an RMT Beep ! See a Movie of the RDC sound set adding realism to a Lionel Burro Crane ! See a Movie of the Atlantic Steamer sound set chuffing along in a 3rd Rail Pennsy N1 ! Cool Features:     Conventional and Command mode operation     Command mode Volume Control from the CAB-1,  4 levels and mute     Conventional mode Volume Control with jumper or switch     Custom Sound Processor for field upgrades or enhancements     Direct connection to the Cruise, AC / DC and Beep Commander     Only 1.5" L  x  1.25" W  x  0.75" H Additional Diesel Features:     Prime Mover revs with 4 speed levels, 4 volume levels and mute     Volume of Prime Mover and Warning Sounds individually settable     Monitors 32/100 speed step selections to adjust rev level appropriately Additional Steamer Features:     Steam Idle sounds with Brake Compressor sounds     Blow Off sound, controlled from the CAB-1     Chuff cadence (4 unique chuffs) triggered from external chuff switch     Volume of Chuff and Warning Sounds individually settable  Command & Conventional Mode Sounds:  - Horn / Whistle  - Bell (diesel or steam)  - Coupler Clank  (activated by Bell button in conventional mode)  - Air Release  (activated by Bell button in conventional mode)  - Diesel - Prime Mover revs  - Steamer - Idle steam, compressor pump Speed Monitor Selection (diesel only):   32 speed step operation: AUX1 + 0 + AUX1 + 0 + BRAKE 100 speed step operation: AUX1 + 0 + AUX1 + 0 + BOOST Additional Applications:   Sound Box Cars, Cabooses, Accessories. A special thanks to Green Frog Productions, Ltd. for providing many of the sound clips used in the Sound Commander product line.  Check out their products at:   http://www.greenfrog.com

TMCC, R2LC, CAB-1, and RailSounds are registered trademarks of Lionel LLC
DCS is a registered trademark of MTH, Inc.